PA66 GF25 Strip Shape I-14.8mm for Aluminum System Door and Window Accessories

• Customization: Available
• After-sales Service: Video Guide
• Highest Working Temperature: 230ºC-255ºC
• Model NO.: PW-I-14.8
• Material: Polyamide and Glass Fiber
• Application: for Thermal Break Aluminum Profile
• Raw Material: PA66 GF25 Granules
• Certificates: SGS
• Technical Performance: GB/T 23615.1-2009
• Print: Customized Laser Printing
• UV Resistance: Yes
• Life: More Than 40 Years
• Transport Package: Roll or Linear
• Specification: I shape (10mm-32mm)
• Trademark: Polywell
• Origin: Zhangjiagang, China
• HS Code: 3916901000
• Production Capacity: 100000 Meters Per Day

Product Description

PA66 GF25  Strip Shape I 10-32mm with Customized Shapes for Aluminum Door and Window Accessories

Product Introduction
The polyamide strip is a mouldable composite material. Its fibers are oriented in all three dimensions to ensure appropriate strength. As such, manufacturers can use these strips across all types of fenestration, including oversized and impact-resistant systems. Therefore, polyamide thermal barriers are the best for thermal break windows.

What is Polyamide Thermal Barrier Strips?.

1. Pre-extruded profiles made from polyamide with 25 percent glass-fiber.
2. Locked in place in 'pockets' extruded into two separate (inner and outer) aluminum extrusions.
3. Enables finished assemblies with different finishes and colors on each surface.
4. Aluminum extrusion pockets need to be 'knurled' prior to insertion of the polyamide profiles-and 'rolled' to create a structurally-secure finished assembly.
5. The polyamide profiles can be supplied with 'sealing-wire' which give a reliable seal and enhanced shear strength when activated by heat e.g.-powder coating.
6. The aluminum extrusions can be finished either before or after installation of the polyamide strips.

Polywell Performance of PA66 GF25 Thermal Break Profiles

NO.	Item	Unit	GB/T 23615.1-2009	PW-Technical specification
	Material Properties
1	Density	g/cm^3	1.3±0.05	1.28-1.35
2	Linear expansion coefficient	K^-1	(2.3-3.5)×10^-5	(2.3-3.5)×10^-5
3	Vicat softening temperature	ºC	≥230ºC	≥233ºC
4	Melting point(0.45MPa)	ºC	≥240	≥240
5	Testing for tensile cracks	-	No cracks	No cracks
6	Shore hardness	-	80±5	80-85
7	Impact strength(Unnotched)	KJ/m^2	≥35	≥38
8	Tensile strength(longitudinal)	MPa	≥80^a	≥82^a
9	Elasticity modulus	MPa	≥4500	≥4550
10	Elongation at break	%	≥2.5	≥2.6
11	Tensile strength(transverse)	MPa	≥70^a	≥70^a
12	High temperature tensile strength(transverse)	MPa	≥45^a	≥47^a
13	Low temperature tensile strength(transverse)	MPa	≥80^a	≥81^a
14	Water resistance tensile strength(transverse)	MPa	≥35^a	≥35^a
15	Aging resistance tensile strength(transverse)	MPa	≥50^a	≥50^a

1.Sample water content less than 0.2% by weight.
2.Norm laboratory condition:(23±2)ºC and (50±10)% relative humidity.
3.The specifications marked with "a" only applies to I-shape strip otherwise, the specifications concluded between supplier and buyer through consultation, shall be written in contract or purchase order.

Storage Conditions
Polyamide thermal breaks are extruded in dry state but they absorb moisture from the environment after the production as time passes. Moisture level depend the following conditions:
- Ambient temperature
- Ambient humidity
- Storage period
During the summer time, when the temperature and humidity in storage area are higher than usual, the insulating profiles absorb more moisture than in the remaining seasons, even stored properly.

Delivery
We have the production capacity of 100,000 meters per day. For common specifications, we have molds, and will be shipped in 7-15 working days after receiving the deposit. 

Packages
For all specifications/shapes, they could be packaged in linear, the length will be 6 meters, or customized.
For the Shape "I", "C", and some simple shapes, they can be packed in rolls. 400-600 meters/roll.

Our Company
Our Company is located in the city of Zhangjiagang, Jiangsu Province, China. We have been making research and development for special material of PA66 thermal insulation strip since 2006.We have a deep understanding and rich experience of the relevant industry during this year.
We expanded our business scope since the year of 2010. We not only produce PA66 granules and PA66 thermal barrier strips, but also sell parallel twin-screw granulator, extruding machine, mould and production technology.
we are developing overseas market. We are going to promote our products all around the world, to seek win-win cooperation, mutual benefits and mutual development with our customers.

Contact us:
Pleass feel free to contact us if you have any questions.
Address: Jinfeng Town, Zhangjiagang City, Jiangsu Province, China