T Type Polyamide66 Thermal Break Strip (14-25mm) Used for Aluminum Window and Door Heat and Noise Insulation
Product Introduction
Broken Bridge aluminum thermal break strip is an important criterion for distinguishing aluminum alloy doors and windows and broken bridge aluminum doors and windows.It is precisely because of the appearance of broken aluminum thermal break strips that the aluminum doors and windows of the broken bridge have good thermal insulation and sound insulation performance. The extruding high precision polyamide thermal break strip is used in windows and doors.Inserted in the thermal break aluminum profiles,it is the part of energy-saving window system for reducing heat sonduction.
Advantages of using polyamide strips:
They provide a better thermal insulation.
They need lesser use of metals.
The polyamide strips are cost-effective.
They are easy to create thermal barriers with.
They help in resources to be conservedand can reduce operating costs.
They ensure maximum stability of the structure.
They are more than effective in resisting condensation.
They don't require any special handling or fabrication.
Polywell Performance of PA66 GF25 Thermal Break Profiles
| NO. |
Item |
Unit |
GB/T 23615.1-2009 |
PW-Technical specification |
| |
Material Properties |
| 1 |
Density |
g/cm3 |
1.3±0.05 |
1.28-1.35 |
| 2 |
Linear expansion coefficient |
K-1 |
(2.3-3.5)×10-5 |
(2.3-3.5)×10-5 |
| 3 |
Vicat softening temperature |
ºC |
≥230ºC |
≥233ºC |
| 4 |
Melting point(0.45MPa) |
ºC |
≥240 |
≥240 |
| 5 |
Testing for tensile cracks |
- |
No cracks |
No cracks |
| 6 |
Shore hardness |
- |
80±5 |
80-85 |
| 7 |
Impact strength(Unnotched) |
KJ/m2 |
≥35 |
≥38 |
| 8 |
Tensile strength(longitudinal) |
MPa |
≥80a |
≥82a |
| 9 |
Elasticity modulus |
MPa |
≥4500 |
≥4550 |
| 10 |
Elongation at break |
% |
≥2.5 |
≥2.6 |
| 11 |
Tensile strength(transverse) |
MPa |
≥70a |
≥70a |
| 12 |
High temperature tensile strength(transverse) |
MPa |
≥45a |
≥47a |
| 13 |
Low temperature tensile strength(transverse) |
MPa |
≥80a |
≥81a |
| 14 |
Water resistance tensile strength(transverse) |
MPa |
≥35a |
≥35a |
| 15 |
Aging resistance tensile strength(transverse) |
MPa |
≥50a |
≥50a |
1.Sample water content less than 0.2% by weight.
2.Norm laboratory condition:(23±2)ºC and (50±10)% relative humidity.
3.The specifications marked with "a" only applies to I-shape strip otherwise, the specifications concluded between supplier and buyer through consultation, shall be written in contract or purchase order.
Application and Advantages
Aluminium window has the disadvantage of limited thermal insulation. Its Uf value, which indicates the amount of heat that passes through a window profile, is simply too high. If your windows have standard aluminium profiles, your home may develop condensation, or even mould. Besides the resulting high repair costs, household mould also aggravates respiratory problems such as asthma.
But that disadvantage has now been completely eliminated if you install polyamide strips in aluminum windows. In fact, thanks to the development of a new invention known as thermal break profiles, aluminium is at least as good as its competitors. In these profiles, produced with specialized machines, a polyamide strip is placed between the inner and outer sections of the profile.
Polyamide is a plastic that insulates more than 500 times better than aluminium, so thermal break profiles have a much lower Uf value - and transmit much less heat or cold. As a result, your home stays warmer in winter, while keeping the heat outside more easily in summer.
PA strips storage and handling
Because PA66 is a hydrophilic substance, it will absorb the surrounding water. The rate and amount of water absorption depend on the ambient temperature, ambient humidity and storage period.
The relative humidity is higher in summer than in other short-term storage seasons. High moisture content (more than 2%) will affect the quality of wear-resistant strips.
When the insulation single bundle is removed from the shelf, it may be deformed. If it is not straightened in time, it will cause permanent deformation.
Therefore, it is recommended to keep it horizontal in a ventilated and dry environment, pay attention to waterproof, stay away from heat source, avoid stress and minimize bending.
If you have any specific questions, please contact us and we are happy to provide you with relevant services.
Delivery
We have the production capacity of 100000 meters per day. For common specifications, we have molds, and will be shipped in 7-15 working days after receiving the deposit.
Packages
For all specifications/shapes, they could be packaged in linear, the length will be 6 meters, or customized.
For the Shape "I", "C", and some simple shapes, they can be packed in rolls. 400-600 meters/roll.
Our service
1. Expertise in the production of standard polyamide thermal break strips.
2. Respect customers' needs, provide customized products, try best to satisfy customers' requirements.
3. Fast service and on-time delivery
4. Strict quality control system, each production process will be strictly supervised by us.
5.We can provide all products on the insulation strip production line and the technical support.
Our Company
Our Company is located in the city of Zhangjiagang, Jiangsu Province, China. We have been making research and development for special material of PA66 thermal insulation strip since 2006.We have a deep understanding and rich experience of the relevant industry during this year.
We expanded our business scope since the year of 2010. We not only produce PA66 granules and PA66 thermal barrier strips, but also sell parallel twin-screw granulator, extruding machine, mould and production technology.
we are developing overseas market. We are going to promote our products all around the world, to seek win-win cooperation, mutual benefits and mutual development with our customers.
Contact us:
Pleass feel free to contact us if you have any questions.
Address: Jinfeng Town, Zhangjiagang City, Jiangsu Province, China
Audited Supplier 
){kind=link}